By default, Windows 11 will be installed. But you can add the `VERSION` environment variable to your compose file, in order to specify an alternative Windows version to be downloaded:
- Start the container and connect to [port 8006](http://localhost:8006) of the container in your web browser. After the download is finished, you will see the Windows installation screen.
- Start the installation by clicking `Install now`. On the next screen, press 'OK' when prompted to `Load driver` and select the `VirtIO SCSI` driver from the list that matches your Windows version. So for Windows 11, select `D:\amd64\w11\vioscsi.inf` and click 'Next'.
- Choose `Custom: Install Windows only (advanced)`, and click `Load driver` on the next screen. Select 'Browse' and navigate to the `D:\NetKVM\w11\amd64` folder, and click 'OK'. Select the `VirtIO Ethernet Adapter` from the list and click 'Next'.
- Once you see the desktop, open File Explorer and navigate to the CD-ROM drive (E:). Double-click on `virtio-win-gt-x64.msi` and proceed to install the VirtIO drivers.
* ### How do I assign an individual IP address to the container?
By default, the container uses bridge networking, which shares the IP address with the host.
If you want to assign an individual IP address to the container, you can create a macvlan network as follows:
```bash
docker network create -d macvlan \
--subnet=192.168.0.0/24 \
--gateway=192.168.0.1 \
--ip-range=192.168.0.100/28 \
-o parent=eth0 vlan
```
Be sure to modify these values to match your local subnet.
Once you have created the network, change your compose file to look as follows:
```yaml
services:
windows:
container_name: windows
..<snip>..
networks:
vlan:
ipv4_address: 192.168.0.100
networks:
vlan:
external: true
```
An added benefit of this approach is that you won't have to perform any port mapping anymore, since all ports will be exposed by default.
Please note that this IP address won't be accessible from the Docker host due to the design of macvlan, which doesn't permit communication between the two. If this is a concern, you need to create a [second macvlan](https://blog.oddbit.com/post/2018-03-12-using-docker-macvlan-networks/#host-access) as a workaround.
* ### How can Windows acquire an IP address from my router?
After configuring the container for macvlan (see above), it is possible for Windows to become part of your home network by requesting an IP from your router, just like a real PC.
To enable this mode, add the following lines to your compose file:
```yaml
environment:
DHCP: "Y"
device_cgroup_rules:
- 'c *:* rwm'
```
Please note that in this mode, the container and Windows will each have their own separate IPs. The container will keep the macvlan IP, and Windows will use the DHCP IP.
Yes, this project contains only open-source code and does not distribute any copyrighted material. Neither does it try to circumvent any copyright protection measures. So under all applicable laws, this project would be considered legal.
The product names, logos, brands, and other trademarks referred to within this project are the property of their respective trademark holders. This project is not affiliated, sponsored, or endorsed by Microsoft Corporation.
